Sapido BR261c User Manual download pdf (Page 80)

◦ Click on Proxies > select Direct connection to the Internet > click on OK

button.

◦ Click on Edit again and then click on Preferences.

◦ Under category, double-click on Advanced and then click on Proxies.

◦ Select Direct connection to the Internet and click on OK button.

◦ Click on OK button.

• Web page hangs, corrupt downloads, or nothing but junk characters is being

displayed on the screen. What do I need to do?

A:Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-

negotiate" feature of your NIC as a temporary measure. (Please look at the

Network Control Panel, in your Ethernet Adapter's Advanced Properties tab.)

• Why can't I connect to the Web Configuration?

A:you can remove the proxy server settings in your web browser.

• Why does BR261c ’s setup page shut down unexpectedly?

A:If one of the pages appears incompletely in BR261c ’s setup pages, please

click on Logout item on the Main Menu before shutting it down. Don’t keep it

working. Then, close Internet browser and open it again for going back to the

previous page.

• I don’t know how to configure DHCP.

A:DHCP is commonly used in the large local network. It allows you to

manage and distribute IP addresses from 2 to 254 throughout your local

network via BR261c . Without DHCP, you would have to configure each

computer separately. It’s very troublesome. Please Open Internet browser >

Input 192.168.1.1 in the website blank field > Select DHCP Server under the

IP Config Menu. For more information, please refer to Router Mode or AP

Mode).

• How do I upgrade the firmware of BR261c ?

A:Periodically, a new Flash Code is available for BR261c on your product

supplier’s website. Ideally, you should update BR261c ’s Flash Code using

Firmware Upgrade on the System Management menu of BR261c Settings.

• Why is that I can ping to outside hosts, but cannot access Internet websites?

A:Check the DNS server settings on your PC. You should get the DNS

servers settings from your ISP. If your PC is running a DHCP client, remove

any DNS IP address setting. As the router assign the DNS settings to the

DHCP-client-enabled PC.

• BR261c couldn’t save the setting after click on Apply button?

A:BR261c will start to run after the setting finished applying, but the setting

isn’t written into memory. Here we suggest if you want to make sure the

setting would be written into memory, please reboot the device via Reboot

under System Management directory.

• Why couldn’t my wireless notebook work on-line after checking?

A:Generally, Wireless networks can sometimes be very complicated to set

up, particularly if you're dealing with encryption and products from different

vendors. Any number of variables can keep your workstations from talking to

each other. Let's go over some of more common ones.

1 2 ... 75 76 77 78 79 80 81 82 83 84

Comments to this Manuals

No comments

Sapido BR261c User Manual Page 80

Comments to this Manuals

Related products and manuals for Routers Sapido BR261c