Sapido BR261c User Manual download pdf (Page 59)

Advanced Settings

Item Description

Fragment Threshold To identify the maximum length of packet, the over length

packet will be cut. The allowed range is 256-2346, and

default length is 2346.

RTS Threshold This value should remain at its default setting of 2347.

The range is 0~2347. Should you encounter inconsistent

data flow, only minor modifications are recommended. If

a network packet is smaller than the present RTS

threshold size, the RTS/CTS mechanism will not be

enabled. The router sends Request to Send (RTS)

frames to a particular receiving station and negotiates

the sending of a data frame. After receiving an RTS, the

wireless station responds with a Clear to Send (CTS)

frame to acknowledge the right to begin transmission. Fill

the range from 0 to 2347 into this blank.

Beacon Interval Beacons are packets sent by an access point to

synchronize a wireless network. Specify a beacon

interval value. The allowed setting range is 20-1024 ms..

Preamble Type PLCP is Physical layer convergence protocol and PPDU

is PLCP protocol data unit during transmission, the

PSDU shall be appended to a PLCP preamble and

header to create the PPDU. It has 2 options: Long

Preamble and Short Preamble.

IAPP Inter-Access Point Protocol is a recommendation that

describes an optional extension to IEEE 802.11 that

provides wireless access-point communications among

multi-vendor systems.

Protection Please select to enable wireless protection or not.

Aggregation Enable this function will combine several packets to one

and transmit it. It can reduce the problem when mass

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

No comments

Sapido BR261c User Manual Page 59