Sapido BR261c User Manual download pdf (Page 79)

A:Yes, the Router mode allows for customization of your public IPs and

Domain.

• Why can’t my computer work online after connecting to BR261c ?

A: It’s possible that your Internet protocol (TCP/IP) was set to use the

following IP address. Please do as the following steps. (Windows 2000 & XP)

Start＞Settings＞Network and Dial-up Connections＞double click on Internet

Protocol(TCP/IP)＞select obtain IP address automatically ＞ Click on OK

button. Then, open Internet browser for testing. If you still can’t go online,

please test something else below.

◦ Verify network configuration by ensuring that there are no duplicate IP

addresses.

◦ Power down the device in question and ping the assigned IP address of

the device. Ensure no other device responds to that address.

◦ Check that the cables and connectors or use another LAN cable.

• Why can't I connect to the router's configuration utility?

A:Possible Solution 1: Make sure that your Ethernet connect properly and

securely. Make sure that you've plugged in the power cord.

Possible Solution 2: Make sure that your PC is using an IP address within the

range of 192.168.1.2 to 192.168.1.254. Make sure that the address of the

subnet mask is 255.255.255.0. If necessary, the Default Gateway data

should be at 192.168.1.1. To verify these settings, perform the following

steps:

Windows 2000, or XP Users:

◦ Click on Windows Start >click on Run > input cmd > click on OK

button.

◦ At the DOS prompt, type ipconfig/all.

◦ Check the IP Address, Subnet Mask, Default Gateway data. Is this

data correct? If the data isn't correct. Please input ipconfig/release >

press Enter > input ipconfig/renew > press Enter.

Possible Solution 3: Verify the connection setting of your Web browser and

verify that the HTTP Proxy feature of your Web browser is disabled. Make

these verifications so that your Web browser can read configuration pages

inside your router. Launch your Web browser.

Internet Explorer Users:

◦ Click on Tools > Internet Options > Connections tab.

◦ Select never dial a connection, click on Apply button, and then click on

OK button.

◦ Click on Tools and then click on Internet Options.

◦ Click on Connections and then click on LAN Settings.

◦ Make sure none of the check boxes are selected and click on OK

button.

◦ Click on OK button.

Netscape Navigator Users:

◦ Click on Edit > Preferences > double-click Advanced in the Category

window.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84

Comments to this Manuals

No comments

Sapido BR261c User Manual Page 79

Comments to this Manuals

Related products and manuals for Routers Sapido BR261c