Sapido BR261c User Manual download pdf (Page 62)

communication, so it can communicate safer than

WEP key which uses single encryption key for

long time. "AES" is harder to decode comparing

to "TKIP", so it can say tougher encryption

scheme than "TKIP"

WPA-Mixed Support WPA and WPA2 at the same time

802.1x Authentication

Radius

For radius server authentication

Personal (Pre-Shared

Key)

* If you configure Pre-Shared Key as

"Hexadecimal in 64 digits", please select "Hex

(64 characters) ".

* If you configure encryption key in "8 to 63

letters in half-width alphabets and numbers",

please select "Passphrase

Access Control

Please refer Wireless Access Control

WPS

This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using

this feature could let your wireless client atomically synchronize it’s setting and

connect to the Access Point in a minute without any hassle. SAPIDO BR261c could

support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy

enable the WPS function.

PIN model, in which a PIN has to be taken either from a sticker label or from the

web interface of the WPS device. This PIN will then be entered in the AP or client

WPS device to connect.

PBC model, in which the user simply has to push a button, either an actual or a

virtual one, on both WPS devices to connect.

BR261c WPS only support no encryption and WPA2

Please follow instructions below to enable the WPS function.

• Setup Wireless LAN with WPS PIN :

◦ Get the WPS PIN number from wireless card and write it down.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 83 84

No comments

Sapido BR261c User Manual Page 62