Sapido BRC70x User Manual

http://www.sapido.com.tw/ User Manual v1.0.01

click control panel. Click View Network Status and Tasks, and then click Manage Network Connections. Right-click Local Area Network, then select “Prop

2.4 Router IP Address Lookup After the IP address setup was completed, please clicks “start” → “run” at the bottom-lower corner of your desktop:Input

NOTE: If the IP address of Gateway is not displayed, or the address followed by ‘IP Address’ begins with “169.x.x.x”, please recheck network connecti

Input User Name and New Password, then input Confirm Password again. Chapter 3 Internet ConnectionThis Chapter describes how to setup BRC70X to the i

2.Enter the User name and Password into the blank and then click Login. The default values for User Name and Password are admin (all in lowerc

Item DescriptionInternet Setup There are several different method to access Internet，ADSL 、DHCP、static IP、PPTP、L2TPStatus You could check WAN, LAN, Cl

DDNS You can assign a fixed host and domain name to a dynamic Internet IP address. Each time the router boots up, it will re-register its domain-name-

3.3Internet Setup Click Internet Setup icon to enter WAN setup as below. The Internet Setup is depended on the service that you contract with the pro

3.3.1 PPPoEItem DescriptionUser Name Input your user name provided by your ISP. If you don’t know, please check with your ISP. Password Input the pa

3.3.3 Static IPItem DescriptionIP Address Enter the IP address which is provided by your ISP. Subnet Mask Please enter the Subnet Mask addressGateway

CE Statement of ConformityOur product has been tested in typical configuration by Ecom Sertech Corp and was found to comply with the essential require

Item DescriptionAddress Mode Select "Dynamic" or "Static"IP Address Input your IP address or domain nameGateway Input ISP Default

Item DescriptionAddress Mode Select "Dynamic" or "Static"IP Address Input your IP address or domain nameGateway Input ISP Default

Chapter 4 GUI Function Setup4.1 StatusYou could check WAN, LAN, Client network informationWAN information LAN information http://www.sapido.com.tw/

Client information 4.2 Parental ControlParental Control provide URL Filtering and MAC Filter Schedule for setuphttp://www.sapido.com.tw/

4.2.1 URL FilteringURL Filtering is used to restrict users to access specific websites in internetItem DescriptionEnable URL Filtering Please select E

4.2.2 MAC Filter ScheduleWhen enabled, filtering will be based on the MAC address of LAN computers. Any computer with its MAC address on this list wil

Item DescriptionEnable MAC Filtering Please select Enable MAC Filtering to filter MAC addresses.4.3 Firmware UpgradeThis function can upgrade the firm

It provide auto detect new firmware from Internet, and user can select to upgrade new version or not. 4.3.2 Manual upgradeIf you download firmware fro

etc. Item DescriptionEnable QoS Check “Enable QoS” to enable QoS function for the WAN port. You also can uncheck “Enable QoS” to disable QoS function

4.5 DoSHome:Item DescriptionHome Check “Home” to enable DoS function for prevention. You also can check “No Prevention” to disable DoS function.Enterp

Chapter 1 Introduction1.1Hardware FeaturesMain Chipset Realtek RTL8196E Network ProcessorFlash & RAM Flash：4Mbytes Serial Flash RAM：32Mbytes

Item DescriptionEnterprise Check “Enterprise” to enable DoS function for prevention. You also can check “No Prevention” to disable DoS function.4.6 IP

almost the same as when a device has a static IP address except that the device must still request an IP address from the DHCP server.Item Description

Item DescriptionEnable SettingCheck this option, will start the VPN Server feature.Connection TypeProvide PPTP or L2TP access connection type.VPN Serv

This section contains configurations for the BRC70X ’s advanced functions such as: virtual server, and DMZ to provide your network under a security en

Public Port Range Enter the port number, for example 80-80.Private Port Range Enter the port number, for example 20-22.Current Port Forwarding Table

Item DescriptionEnable DMZ It will enable the DMZ service if you select it.DMZ Host IP Address Please enter the specific IP address for DMZ host.4.9 D

Please enter Domain Name, User Name/Email, and Password/Key. After entering, click on Apply Changes to save the setting, or you may click on Reset to

Item DescriptionHTTP Connection PortUsers can access GUI by this port，default is 80Enable Web Server Access on WANAllow user access GUI from WAN side4

4.13 RebootThis function is used to reboot4.14 LogoutThis page is used to logouthttp://www.sapido.com.tw/ User Manual v1.0.0

Chapter 5 Advance Setup5.1 Internet Mode: Internet SetupPlease refer Internet Setup5.2 IP Config5.2.1.1 PPPoEItem DescriptionUser Name Input your use

1.2 Product AppearanceLED Indicator Status Description: LED Function Color Status DescriptionPower System status GreenOn System is ready to workStatus

Connection Type Three types for select: Continues, Connect on Demand, and Manual.MTU Size Maximum Transmission Unit. Usually provide by computer opera

Clone Mac Address Some ISPs require MAC address registration. In this case, enter the MAC address registered to the provider to "Clone MAC Addres

5.2.1.4 PPTPItem DescriptionServer IP Address Input your server IP address provided by your ISP. If you don’t know, please check with your ISP. User

dictionarDNS Select Attain DNS Automatically. Or select Set DNS Manually, if you want to specify the DNS, and enter the DNS provided by your ISP in DN

DNS Select Attain DNS Automatically. Or select Set DNS Manually, if you want to specify the DNS, and enter the DNS provided by your ISP in DNS 1 2 3.

Default Gateway Input ISP Default Gateway Address. If you don’t know, please check with your ISP.DHCP Enable or disable DHCP

Please enter Domain Name, User Name/Email, and Password/Key. After entering, click on Apply Changes to save the setting, or you may click on Reset to

Item DescriptionOrigin TypeSLAAC、DHCPv6、IP。Please check ISP to get correct typeWAN Link TypePPPoE、IPPPPoEUse IPv4 PPPoE account and password to do IPv

5.4 NATThis section contains configurations for the BRC70X ’s advanced functions such as: virtual server, and DMZ to provide your network under a secu

Item DescriptionEnable Virtual Server Select to enable virtual server or not.Address Specify the IP address which receives the incoming packets.Protoc

LAN x 4LAN port activityGreenOn 100Mbps Ethernet is connectedBlinking (30ms)100Mbps Ethernet Tx/Rx activityGreenOn 10Mbps Ethernet is connectedBlinkin

5.5 VPN Server: PPTP/L2TP SetupPlease refer VPN server5.6 Firewall5.6.1 DoSPlease refer DoS5.5.2 QoShttp://www.sapido.com.tw/ User Manua

Item DescriptionEnable QoS Check “Enable QoS” to enable QoS function for the WAN port. You also can uncheck “Enable QoS” to disable QoS function for t

Mode Select Guaranteed minimum bandwidth or Restricted maximum bandwidthUplink Bandwidth Key in the bandwidth.Downlink Bandwidth Key in the bandwidt

5.5.4 IP FilteringWhen enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP addressesItem DescriptionEnable IP F

5.5.5 Mac Filter SchedulePlease refer Mac Filter Schedule5.5.6 URL FilteringPlease refer URL Filtering5.5.7 IP BindingPlease refer IP Binding5.5.8 VLA

Priority It indicates the frame priority level. Values are from 0 (best effort) to 7 (highest); 1 represents the lowest priorityCIFEnable or Disable C

5.6 SystemThis section including Wake on LAN, Change Username/Password, Upgrade Firmware, Profiles Save, Remote Management, Time Zone, UPnP,

Input User Name and New Password, then input Confirm Password again.5.6.4 Firmware UpgradePlease refer Firmware Upgrade5.6.5 Profiles SaveUsers can

(3).Select the location which you want to save file, then click Save. 2. Load configuration file (1).Tap “browse” and select configuration file t

(2).Click Upload to upload configuration file to BRC70X . (3).After 60 seconds, BRC70X will reboot automatically.5.6.6 Remote ManagementPlease ref

Chapter 2 System and Network SetupThe BRC70X is an easy to setup device for various application and environment, especially for large installs such as

Item DescriptionTime Zone Select Please select the time zone.Enable NTP client update Please select to enable NTP client update or not.Automatically A

environments for simplified installation of computer components. BRC70X supports UPnP function, and can cooperate with other UPnP devices

Item DescriptionEnable Dynamic Route Enable or Disable dynamic routeNAT Enable or Disable NAT functionTransmit There are 3 options：1. Disable：do not s

Item DescriptionIPSec Pass-through Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP l

6 Q & A6.5 Installation1. Q: Where is the XDSL Router installed on the network?A: In a typical environment, the Router is installed between the XD

6.7 IP Address1. Q: What is the default IP address of the router for LAN port?A: The default IP address is 192.168.1.1 with subnet mask 255.255.255.02

2. Q: Why can't I connect to the router's configuration utility?A: Possible Solution 1: Make sure that your Ethernet connect properly and se

5.Select Direct connection to the Internet and click on OK button.6.Click on OK button.3. Q: Web page hangs, corrupt downloads, or nothing but junk ch

address setting. As the router assign the DNS settings to the DHCP-client-enabled PC.5.Q: BRC70X couldn’t save the setting after click on Apply button

7 Appendices7.5 Operating Systems1.Microsoft：Windows 2000, XP, Vista, Windows 7. 2. Apple：Mac OS X 10.4.7, Leopard and the following related versions.

2.3 Network setupAfter the network connection is built, the next step is setup the router with proper network parameters, so it can

1. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”.2.3.2 Windows XP1. Click “Start” button

2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”.2.3.3 Windows Vista / Windows 71. Click